Where to Buy
CareGiver® Model 390 Series – 1-½” Angled 90° Safety Grab Bars
Featuring exceptional strength and rigidity, CareGiver® Safety Grab Bars represent the “best-in-category” for their combination of quality, exclusive features and overall performance. Whether you are designing for a health care facility or upgrading a home shower…go with the best in Grab Bars… CareGiver®…only from E.L. Mustee & Sons, Inc.
Design Features:
- Smooth stainless steel, 18 gauge tubing, satin finish, 1-½” diameter
- Exclusive, Twist-Lock concealed flange snaps into place for a secure, tamper-proof mounting
- Stainless steel mounting flange is Heliarc welded to the tube to form a single, high strength structural unit that cannot be separated
- All bars have a nominal offset distance of 1-½” (38mm)
- Flat contact surface won’t cut or mar wall surfaces – bar remains stable without further tightening
- 304 stainless steel mounting flange, 14 gauge
- Tested to withstand 500 lbs. of downward load...when properly installed
Code Accepted
CareGiver® Grab Bars meet or exceed performance requirements:
- American National Standards Institute (ANSI) A117.1
- Meets or exceeds HUD, FHA, VA, ADA and other Federal/local codes
Available Colors & Models:
Model No |
AxB |
C |
UPC |
|
| 390.308 | LH | 24" x 16" | 90° | 6 71031 00436 9 |
| 390.309 | LH | 32" x 16" | 90° | 6 71031 00437 6 |
| 390.310 | RH | 24" x 16" | 90° | 6 71031 00438 3 |
| 390.311 | RH | 32" x 16" | 90° | 6 71031 00439 0 |
| LH= Left Hand RH=Right Hand |
||||
Dimensions
 |
Model No |
AxB |
| 390.308 | 24" x 16" | |
| 390.309 | 32" x 16" | |
| 390.310 | 24" x 16" | |
| 390.311 | 32" x 16" | |
General: Furnish and install as shown on plans, Angled Safety Grab Bar, as provided by E.L. Mustee & Sons, Inc. model_____ Grab Bar with _____(RH, LH) measuring ___x___ with 90° angle with Twist-Lock concealed flange shall be 1-½” diameter, 18 gauge, type 304 stainless steel tubing. 14 gauge stainless steel mounting flange shall be Heliarc welded to the tube to form a single structural unit. Grab bar shall comply with applicable building codes. Meets ANSI A117.1
